Alke
Electric Vehicles Alke'
Electric Vehicles ATX100E |
|
The ATX100E are very compact electric vehicles, more shorter of 50 cm than ATX200E with load capacity of 500 kg and tow capacity of 2000 kg.
This vehicle is used in very narrow areas and when there is the need of very strong vehicle.
Between main characteristics we find: 6 kW SEM excitation engine, double speed mode, engine braking system with energy recovery, best in class 600 A controller, 8x6 V drive batteries and on-board high frequency charger to plug everywhere.
This machine fits independent Mac Pherson front suspensions and De-Dion axle with a stabilizer bar at the rear that guarantee permanent grip of all wheels, even on rough ground, avoiding possible skidding or loss of control. Other standard assets are: dual circuit hydraulic brakes, parking brake, front and rear double tongue tow bars, differential guard, headlight, tail lights, safety strobe light, stop and hazard lights, horn, 12 V on-board plug, glove box with lock, loading bed with aluminum drop sides and steel full-height cargo barrier with roll bar function.
The rear cargo bed is 1300 mm long on the ATX100E. The internal steering radius of ATX100E is only 2.6 metres.
You can see detailed technical specs ATX 100E ATX100E are professional electric vehicles designed to resist work loads of more than 8 hours a day. Finishes are cared for in every detail. The modern dashboard laid out like that of a car allows the user to keep all the vehicle tools and commands under control at all times. For difficult environmental and climatic conditions, a cab or half-cab may be fitted, and there is also the possibility of a Webasto internal heating system.
|

- up to 3.000kg towing capacity
- no noise and pollution
- up to 1.000kg loading capacity
- up to 40% slopes
- off-road capabilities
- all about electric UTV

- permanent 4WD
- up to 1000kg loading capacity
- up to 46% slopes
- perfect for off-road
- all about 4x4 utility vehicles